Unboxing and Getting the Printer ready

Opening the cardboard box

After receiving the package, make sure that you are opening the box the correct way. There is shipping labels and a warning sticker on the package.

Place the package on the floor and cut open the tape on top.

The package contains on top all the accessories, and below them, the printer.

Accessories

Included in the box

Included in the box

  1. Power supply
  2. Extra Hot-end package
  3. Power cord
  4. Bowden tube
  5. Spool holder
  6. Stylus

Can be used to operate the touch screen more easily

  1. Hex key set
  1. 1.5mm 
  2. 2mm
  3. 2.5mm
  4. 3mm (used to remove fan cover and hotend)
  5. Side Cutters

Used to clean the filament (end of spool) and clean support materials from the printed parts

  1. Spatula set

Used to remove printed parts & cleaning the build plate

  1. Brush set
    1. Nylon brush: cleaning extruder motor gear and inside the machine
    2. Brass brush (Black): Cleaning nozzle in normal cases. Cleaning extruder gear in difficult cases.
    3. Stainless steel brush (Grey color): Cleaning nozzle in difficult cases.
  2. Two build plates

The standard Manu Easy Acrylic Build Plate suitable for printing PLA filament 

  1. Top plate

Recommended to use to keep the machine more warm and stable during printing

+Two spools of PLA filament (diameter 1.75mm)