There are currently three main groups of filament supported in the Manu Easy 3D Printer.
- Thermoplastic Urethanes
The extruder design makes fiber reinforced special filaments work really well in the printer.
The usage of plastic build plates makes sure that there is no first layer issues with right combination of plate material and the filament even with the most difficult to print materials.
- The first layer relies on an accurate co-polymerization reaction between the filament and the bed. Accurately adjusted first layer temperature makes the part stick just the right amount.
- There is no need for tape or glue while printing and the print repeats always same way without extra hassle.
- There is no heated bed and because of this, there is very minimum amount of fine particles created in the printing process in air.
![[Screenshot 2023-03-08 at 3.29.20 PM.png]]